The Plier Holder Long has been redesigned and released as Ver.2.
Like the previous model, it is a general-purpose plier holder that can store pliers with a total length of approximately 200mm.
The cross-band structure allows for even pressure to be applied to the entire plier, so the cover opening does not easily widen even when the pliers are removed, and it maintains a tight fit. (If the outer cover shifts, pull the cord and fix it in the appropriate position with the stopper.)
When wading through dense vegetation, you can attach the rubber cord to one side of the pliers' grip to prevent them from falling out.
You can also adjust the length of the rubber cord on both sides, so you can set the position of the cord stopper to whichever side is easier to handle.
The pliers used in the image are Belmont Solid SUS Pliers MP-260 (sold separately). The forceps used in the image are also sold separately and are only for illustrative purposes.
Please attach it to bags, various belts, straps, life vests, etc. The pliers are held in place by a full tightening method using a rubber cord, and are released by pulling out the pliers. If there is a risk of the pliers falling off while bushwhacking, etc., secure them by attaching the rubber cord to one side of the pliers' grip. *Rubber cords are also available as "repair rubbers for various holders". *Recommended length of rubber cord: 69cm
MATERIAL: Heavy Nylon Twill SIZE: 185mm x 60mm Storage size: Up to approximately 110mm for the pliers nose and 50mm in width at 130mm from the tip of the pliers. COLOR: CYOTE BROWN/BLACK
