Made from a rigid material for exceptional sensitivity! Even the slightest bites and bottom contact are easily detected!
Its high specific gravity and small head result in outstanding casting distance!

Sharp penetration, firm hold. Bringing the ideal to life.

We selected a thicker wire diameter of 0.64mm and repeatedly tested and refined multiple shapes through actual fishing, making adjustments down to the millimeter. Taking advantage of the thickness, we sharpened the taper angle of the hook point by 30%. It penetrates sharply with light force and holds firmly thanks to the thick wire diameter. The fluorine coating improves penetration and thrust, allowing it to penetrate with light force. We created this hook while valuing the actual sensations you feel at the fishing spot: the feeling of a bite, the feeling when you hook a fish, and the penetration power.

The line is easy to thread.

Features a large eyelet! Easy to thread line through for those who prefer direct connections, and easy to change for those who prefer snaps!

Long eye that bites immediately

The hook point and long eye quickly make contact inside the mouth, increasing the speed at which the hook penetrates! Instant hookups are possible! No need to rush! Normally, horse mackerel spit out their food very quickly, so an immediate hookset is necessary, but with this instant hookup, a slow, sweeping hookset works well.

Outstanding presence

The upper front surface of the head receives the water flow, giving it a strong presence, while the front corners divide and deflect the water flow, resulting in stable swimming.

A well-defined fall is achieved.

During tension fall, the front lower surface receives water flow, resulting in an unprecedentedly slow sinking speed. In free fall, the corners at the bottom of the head cut through the water, achieving an even faster sinking speed. *Even in free fall, the jig head does not rotate, so it does not alarm the horse mackerel.

Easy to understand

The weight is stamped on both sides, so you can see the weight at a glance and rotate them quickly.

*The tungsten head and needle are bonded together with plastic resin, so if you hold the head and remove the needle, the bond may break and the head may come off.
When removing the needle, do not hold the head, but press on the needle part to remove it.